Latest NETWORKING SOLUTIONS topics

Topic	Replies	Views	Activity
Important Note About Firmware Update Dear Community, We would like to inform you that if a system upgrade with keep settings is performed from firmware version 7.14 or 7.14.1 to 7.14.2, the following command must be executed via CLI before the upgrade to a…	17	186	May 14, 2025
Rules / guidelines for Teltonika Networks	2	2182	January 11, 2024
Events reporting via email stopped working	2	34	May 14, 2025
All routers offline, despite showing online	14	26	May 14, 2025
RUTX50 Internal modem firmware - where	2	36	May 14, 2025
TRB140 with no SIM	0	3	May 14, 2025
RUTX50 failover not working if IPSEC tunel enabled	0	5	May 14, 2025
L2TP over IPSec @ RUTX_R_00.07.14 doesn't work	7	67	May 14, 2025
vpn ipsec/l2tp problem after update RUTX_R_00.07.14.2	3	19	May 14, 2025
Modem works but RMS connections dropped	6	49	May 14, 2025
RutX11 cannot connect to mobile network	2	18	May 14, 2025
Accessing router through it's hostname on WAN	0	4	May 14, 2025
RUT956 disconnecting every hour with ESM reject	1	6	May 14, 2025
RUT950 stuck on bootloader page	5	10	May 14, 2025
RUT241 and RUTOS 7.14.2 SMS send not working from Webinterface?	0	4	May 14, 2025
Glasfasermodem 2, or DSL Modem German Telekom	1	18	May 14, 2025
Unable to set and request data_limit via api for other than the first eSIM profile	1	33	May 14, 2025
SMS Sending via API?	6	20	May 14, 2025
RUT241 cannot connect to RMS	1	21	May 14, 2025
Wireguard proxy setup	3	13	May 14, 2025
RUTX50 Failover behaviour?	5	29	May 14, 2025
Routing public subnet over IPSec	2	16	May 14, 2025
Setting IP on Ipsec interface for dynamic routing	0	5	May 14, 2025
RMS not active following RUT241 firmware update	17	61	May 14, 2025
Bad Checksums for rutm firmware 07.14.2	1	15	May 14, 2025
Split Tunneling issues	1	31	May 14, 2025
Lua Script in data to server section	4	83	May 14, 2025
RUTX09 RED 3.3 compliance	3	25	May 14, 2025
RMS not activating	8	40	May 14, 2025
URLs or IP addresses to be whitelisted on SIM network	1	11	May 14, 2025

Important Note About Firmware Update

Dear Community, We would like to inform you that if a system upgrade with keep settings is performed from firmware version 7.14 or 7.14.1 to 7.14.2, the following command must be executed via CLI before the upgrade to a…