dexif
May 30, 2024, 11:01am
2
The main idea is that the tracker must always be connected so that I can send it a command at any time through the connection.
Hello everyone! I own an FMB 130 + Can Control device. Due to the possibility of sending commands at any time, whether the vehicle is stationary or in motion, I have a configuration that keeps the connection constantly open. The OpenLink Timeout is set to 259,000, and I’m sending a ping to the server every minutes. However, due to issues with the internet or other reasons, sometimes the connection between the device and the server can drop, and when this happens, the device doesn’t send new data…
I’m forced to configure the FMC234 via the server (Fles.pi) with commands, as I don’t have a way of connecting directly to the device (No windows computer).
Everything I’ve tried to keep the connection open doesn’t seem to work, only way is to set the voltage so it triggers movement and keep the unit communicating.
If I send a command when not doing the above, it takes an hour before the unit wakes up and commands are received. Now this could just be normal behaviour so just want to check if …