Hello,
Thank you for providing screenshots. Firstly, we need to figure out why you can’t access your RUT901 via the VPN hub. Once you can access it, its LAN devices should be accessible as well.
First, please confirm that your device has the latest RUT9M_R_00.07.06.10 firmware version installed. If not, please upgrade it (you can download it from here).
I suggest trying to create a new hub following my instructions and see if it works now. If so, then we can add your specific configurations and devices.
-
Log into your router’s WebUI, navigate to System → Administration → Access Control, and under ‘WebUI’, enable remote HTTP access.
-
Scroll down to the end of the page and press ‘Save & Apply’.
-
In RMS navigate to RMS VPN → VPN hubs and press ‘Add’.
-
Enter your desired name for a VPN hub; select the Location, e.g. Bahrain; press ‘Create’.
-
Open your created VPN hub, navigate to Clients, press ‘Add’, select RMS User you want to add, and then select RMS Device you want to add.
-
Download the VPN configuration file.
-
Open the OpenVPN Connect app and upload file with VPN configuration you have downloaded.
-
Press ‘Connect’.
-
Open your RMS VPN hub, navigate to the General section and copy IP address next to your RUT901.
-
Paste this IP to your browser, and you should able to access your router’s WebUI login page.
After completing these steps, let me know if you are able to access your RUT901 via the RMS VPN IP.
Best Regards,