Hi, today I upgraded my TRB500 to firmware “TRB500_R_00.07.08” and there is no “Data” limit type in Network > Mobile > Limits. It’s that ok? I read in the changelog that this tab should be available.

Hello, I just checked, and I see this option available in the WebUI. Could you please specify if you upgraded with the “Keep settings” option? If so, this is likely the cause of the issue. As a solution, I recommend performing a factory reset and checking if the issue persists. Best Regards,

Yes, of course, I updated with the “Keep Settings” option, but why do you “recommend factory reset”. This isn’t how it’s supposed to work.

In newer firmware versions, some interfaces and their display configurations can differ from older versions. Consequently, upgrading with the “Keep settings” option can sometimes cause issues like yours, where the “Limits” section does not appear in the WebUI. If performing a factory reset is not a…

I apologize for any inconvenience, but unfortunately, TRB devices do not support the data limit function. This is not an issue with the firmware. Thank you for your understanding. Best Regards,

Product wiki says something different: TRB500 Mobile - Teltonika Networks Wiki

Hello, Sorry for any inconvenience and thank you for pointing this out. This is a mistake in the wiki, and the part about the data limit will be deleted. Best Regards,

So why is there information in the changelog of the latest version indicating that such a function exists? https://wiki.teltonika-networks.com/view/TRB500_Firmware_Downloads Mobile: added new Mobile->Limits page which shows information and allows to configure Data and SMS limits Mobile: moved Mobi…

Hello, There is a mistake in the changelog regarding Limits, and this information will be deleted from the wiki. You can find the data limit configuration by navigating to Network → WAN and clicking “Edit” on the mob1s1a1 interface in the “Mobile Data Limit” section. Best Regards,

[image] Marija: You can find the data limit configuration by navigating to Network → WAN and clicking “Edit” on the mob1s1a1 interface in the “Mobile Data Limit” section. [image] [image] I don’t have such section as “Mobile Data Limit”.

Hello, We apologize for any inconvenience this may have caused. Specifically, the TRB500 device differs from other TRB models, and currently, it is not possible to use the data limit function. In the previous firmware versions, this function was inadvertently added to the TRB500 WebUI, but unfortun…

TRB500 No "Data" limit after upgrade to 00.07.08

Networking Solutions

mcwnuq July 26, 2024, 1:42pm 11

I don’t have such section as “Mobile Data Limit”.