TRB142 Problem with RS232 over IP Part 2

[JRPDME]

I am not able to reply the other Topic any more, so i have to make a new topic.

The old topic.

TRB142 Problem with RS232 over IP

Hello. We are using the TRB142 to communicate with some pump controllers with RS232 modbus TCP. Now we got some new TRB142 with a newer FW and know we cant get connection trough RS232 Over IP. I have tried these new FW: TRB1_R 00.07.05_WEBUI TRB1_R 00.07.05.4_WEBUI TRB1_R 00.07.06.2_WEBUI TRB1_R 00.07.06.4_WEBUI But cant get trough, but i can see that the TX: is counting up. [image] I have then testet with a modem with FW: TRB1_R 00.07.04.5_WEBUI With the same settings as the modem …

I can see that there is a new FW that i will have to try, but why do i not get any information about that.
I why isn’t there any changelog in that FW?

Kind regards
Jan.

[JRPDME]

Hello.

It seems that i can get the FW TRB1_R_00.07.06.5 to work by setting RAW mode = on
But if i set RAW mode = off then it is still working until i reboot the modem.

But how come i have to set Raw mode = on
when the Raw mode = off is working in the older Firmwares?
and by older i mean from TRB1_R 00.07.04.5_WEBUI an older.

Hope you can give some answers because we are in need for the modems.

Regards
Jan.