Teltonika RUTX50 Antennas

[Daumantas]

Hello,

Yes, that is correct. However, all 4 antennas should be used.
Please refer to other questions on this topic:

TRB500 which antenna connector is which?

I’m looking to connect an external 4x4 MiMo antenna, but need to know which connector is which on the TRB500. The antenna has the four coaxes marked as Cell 1 Main / Aux and Cell 2 Main / Aux. Which should I connect to which connector? This is the antenna I have (4x4 version) https://poynting.tech/antennas/xpol-1-5g/ Jim

TRB500 with external antenna

Hello, While we cannot guarantee a reliable operation with only two antennas, the device should work fine. I’d recommend plugging the antenna into the outer SMA connectors, and at least leaving the stock antennas on the middle two SMA connectors. The middle connectors are mainly for 4x4 MIMO and higher frequency bands, which are usually not available in rural areas. Best regards,

How to lock onto N78

Great to hear that! Regarding the antennas, to simplify, yes, the inner two antennas are mainly for high frequency bands, as well as 4x4 MIMO. Best regards,

Best regards,