Hi Community,
RUTX08 with latest firmware 07.09.04.
Need to access the PC and the PLC by a seperate VLAN-10 ip-address on those ports listed.
Trying to make the RUTX08 to understand when accessing e.g. RDP on ip-address 172.0.11.5 it must land on 192.168.100.2.
The same scenario for the soft PLC.
Is it possible to configure the RUT for this scenario?
Best regards
//Hans
Hello,
Apologies for the delayed response.
First, I would like to point out that the firmware version on your device is not the latest. The most recent version is 7.10.2, which you can download here. Please update your device accordingly.
Regarding your setup, I recommend reviewing the following wiki pages, which might be helpful for configuring your desired setup:
Additionally, our wiki contains extensive information on various device functions and configuration examples, so please take a look. If you still need assistance after reviewing, feel free to reach out.
Best regards,
This topic was automatically closed after 15 days. New replies are no longer allowed.
