Hej,
I got a RUT140 Firmware: RUT14X_R_00.07.09.1
My situation is as followed. I have a machine network:192.168.2.xxx
This a network with accesible PLC’s
On the other hand I have some machines that have there own network 192.168.4.xxx.
i wuld like to access 3 IP adresses out of this 192.168.4.xxx. network as if they had IP 192.168.2.xxx
I dont want the entire 192.168.4.xxx.network attached to the main network. just the IP adresses I pick.
I have seen a some posts about this and tryed the solutions but can’t get it to work.
RUTX08 1 to 1 NAT on entire subnet - Teltonika Networks - Teltonika Community
My testing situation is:
Computer:
Static IP: 192.168.2.120 (connected to directly to WAN port)
SubNet: 255.255.255.0
Gateway: 192.168.2.1
RUT140 WAN
Static 192.168.2.1/24
the rest is empty
RUT140 LAN
Static 192.168.4.1/24
the rest is empty
PLC
Static 192.168.4.2
SubNet: 255.255.255.0
Gateway: 192.168.4.1
I hope anybody has a clear answer on how to fix this.