IP frame routing from a LAN to a Zerotier VPN

NETWORKING SOLUTIONS
1

Hi

I have a PC in 192.168.1.x (who is distant)
I have a zerotier VPN in 192.162.101.0
I have a LAN teltonika in 192.168.1.0

I have a conflict between my local LAN and my remote teltonika LAN. I want to virtualize the remote LAN in 192.168.101.0
I want to have access to the teltonika LAN (192.168.1.0) on my PC via zerotier in 192.168.101.0

When I ping 192.168.101.2 the ping arrives at the router but the packets are not routed to 192.168.1.2.

How to route the packets 192.168.101.0 to 192.168.1.0 and vice versa.
Or in other words, how to have access to the LAN remotely as if we were physically present locally?

Best regards

2

Hello,

Thank you for sharing the details of your setup.

For your scenario, I recommend reviewing the ZeroTier Bridge Configuration guide on our wiki, which explains how to bridge your local and remote networks.

Best regards,

4

There is a small difference is that I want to access the remote network via the class 192.168.101.0 and not 192168.1.0 and only from one branch.
I have identical IP addresses on both branches
see photo below.

image
image594×510 41 KB