Eddystone beacon not recognized in the immobilizer scenario

[rhen]

A holyiot beacon is used configured as eddystone beacon. I entered the id namespace and id instance via sms to the fmc130. Via configurator i did set the beacon list to configured.The status tab shows the beacon with the same values.

The imobilizer settings i enabled sending sms and dout2 and beacon on ibutton off.

Inition source to din1

Bluetooth ble enabled.

Using this results in an sms with immoliliser value 0 or 2. Never saw 1. Expected is 1.

How to get it operational

[Patrick_Sangalang]

Hello @rhen,

I hope you are doing well. Immobilizer value would be 2 if you are implementing Authorized Driving, otherwise if Authorized Driving is disabled the value received would be 1.

Hope this helps.

Best regards,
Patrick S.