# WGET fails in Firmware: RUT9\_R\_00.07.06.3

**URL:** <https://community.teltonika.lt/t/wget-fails-in-firmware-rut9-r-00-07-06-3/4529>\
**Category:** Networking Solutions\
**Created:** [February 29, 2024, 8:28am UTC](https://community.teltonika.lt/t/wget-fails-in-firmware-rut9-r-00-07-06-3/4529 "2024-02-29T08:28:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bavian](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/b/87869e/32.png) [@bavian](https://community.teltonika.lt/u/bavian)\
**Post date:** [February 29, 2024, 8:28am UTC](https://community.teltonika.lt/t/wget-fails-in-firmware-rut9-r-00-07-06-3/4529/1 "2024-02-29T08:28:40Z")

</div>

I have just updated my RUT955 firmware to: RUT9\_R\_00.07.06.3.  
In Auto Reboot I have setup a WGET reboot for host [www.google.com](http://www.google.com) with interval min: 15, timeout 10, interval tries: 3. WGET fails every time. I’ve tried PING instead which works just fine.

The router has been running with firmware: RUT9XX\_R\_00.06.09.5 for a long time without any problems with the WGET.

Is this an error in the new firmware? Should I use another host target than [www.google.com](http://www.google.com)?

![image](https://community.teltonika.lt/uploads/default/original/2X/c/c882c45bb79d3af1d6494d1e4ce1f160b6e23670.png)

---

<div class="post-metadata">

**Author:** ![Daumantas](https://community.teltonika.lt/user_avatar/community.teltonika.lt/daumantas/32/29_2.png) [@Daumantas](https://community.teltonika.lt/u/Daumantas)\
**Post date:** [February 29, 2024, 2:09pm UTC](https://community.teltonika.lt/t/wget-fails-in-firmware-rut9-r-00-07-06-3/4529/3 "2024-02-29T14:09:26Z")

</div>

Hello,

It’s hard to say what could be causing the issue, but if your device resolves `google.com`, then your configuration should work.  
Was the device updated with the option to Keep Settings enabled? Since this is a very big jump between the versions, this could cause configuration issues, as a lot of the options have changed. If you don’t have a lot of parameters configured, I’d suggest performing a factory reset.  
Otherwise, could you try specifying 8.8.8.8 instead of [google.com](http://google.com)?

Best regards,

---

<div class="post-metadata">

**Author:** ![system](https://community.teltonika.lt/user_avatar/community.teltonika.lt/system/32/15707_2.png) [@system](https://community.teltonika.lt/u/system)\
**Post date:** [March 15, 2024, 8:29am UTC](https://community.teltonika.lt/t/wget-fails-in-firmware-rut9-r-00-07-06-3/4529/4 "2024-03-15T08:29:34Z")

</div>

Closed on March 15, 2024, 8:29am UTC

This topic was automatically closed after 15 days. New replies are no longer allowed.