# The power cable which Teltonika Routers use

**URL:** <https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521>\
**Category:** Networking Solutions\
**Created:** [January 3, 2024, 10:55pm UTC](https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521 "2024-01-03T22:55:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![RokeJulianLockhart](https://community.teltonika.lt/user_avatar/community.teltonika.lt/rokejulianlockhart/32/26355_2.png) [@RokeJulianLockhart](https://community.teltonika.lt/u/RokeJulianLockhart)\
**Post date:** [January 3, 2024, 10:55pm UTC](https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521/1 "2024-01-03T22:55:04Z")

</div>

The cable which all Teltonika Routers appear to use is the 4-pin Molex MicroFit 3.0, per [https://www.reddit.com/u/rokejulianlockhart/comments/167lfed/comment/k2pfjit/?utm\_source=share&utm\_medium=web2x&context=3](https://www.reddit.com/u/rokejulianlockhart/comments/167lfed/comment/k2pfjit/?utm_source=share&utm_medium=web2x&context=3). I don’t believe that this is explained anywhere obvious, and can be immensely important when looking for a configuration which Teltonika doesn’t sell, like a version with an IEC 60320 connector at its AC end rather than a country-specific plug.

Regardless, I do recommend

1. `https://teltonika-networks.com/products/accessories/powering-options/uk-power-supply-62w`
2. `https://teltonika-networks.com/products/accessories/powering-options/4-pin-to-4-pin-power-cable-1`

with an honourable mention to

1. `https://teltonika-networks.com/products/accessories/powering-options/4-pin-power-adapter-with-io-access-1`
2. `https://teltonika-networks.com/products/accessories/powering-options/4-pin-to-barrel-socket-adapter-1`

because no other company provides such standardized and comprehensive options for 4-pin Molex MicroFit 3.0-compliant power cables. All options can be seen at `https://teltonika-networks.com/products/accessories/powering-options/?page=1`.

* * *

I’m unable to add this as an answer to [What power connectors do Teltonika routers use?](https://community.teltonika.lt/t/what-power-connectors-do-teltonika-routers-use/1551) so if you’re a moderator, please merge this and reopen the thread.

---

<div class="post-metadata">

**Author:** ![RokeJulianLockhart](https://community.teltonika.lt/user_avatar/community.teltonika.lt/rokejulianlockhart/32/26355_2.png) [@RokeJulianLockhart](https://community.teltonika.lt/u/RokeJulianLockhart)\
**Post date:** [January 3, 2024, 11:11pm UTC](https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521/2 "2024-01-03T23:11:47Z")

</div>

> [@RokeJulianLockhart](#):
>
> [https://teltonika-networks.com/products/accessories/powering-options/uk-power-supply-62w](https://teltonika-networks.com/products/accessories/powering-options/uk-power-supply-62w)

I’d like to use [Amazon.com: Teltonika PR3PWUK3 UK Power Supply; 62W; 48 VDC; for use with TSW100 PoE Switch : Electronics](https://www.amazon.com/Teltonika-PR3PWUK3-Supply-TSW100-Switch/dp/B0B64H3B4R) for my RUTXR1, but I’m not familiar with whether having it rated for higher than the RUTXR1 (my sole use case for it) can handle (relevantly, see `https://www.reddit.com/r/UsbCHardware/comments/138rf9s/comment/jizbwbo/?utm_source=share&utm_medium=web2x&context=3`) would damage it. I’m used to power negotiation like USB-PD provides. Consequently, would it?

---

<div class="post-metadata">

**Author:** ![RokeJulianLockhart](https://community.teltonika.lt/user_avatar/community.teltonika.lt/rokejulianlockhart/32/26355_2.png) [@RokeJulianLockhart](https://community.teltonika.lt/u/RokeJulianLockhart)\
**Post date:** [January 6, 2024, 10:05pm UTC](https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521/3 "2024-01-06T22:05:51Z")

</div>

> [@RokeJulianLockhart](#):
>
> I’d like to use [Amazon.com: Teltonika PR3PWUK3 UK Power Supply; 62W; 48 VDC; for use with TSW100 PoE Switch : Electronics](https://www.amazon.com/Teltonika-PR3PWUK3-Supply-TSW100-Switch/dp/B0B64H3B4R) for my RUTXR1

I ask because I can’t feasibly use the G-plug version recommended for the device, whereas the IEC 60320 C8 connector is perfect.

---

<div class="post-metadata">

**Author:** ![RokeJulianLockhart](https://community.teltonika.lt/user_avatar/community.teltonika.lt/rokejulianlockhart/32/26355_2.png) [@RokeJulianLockhart](https://community.teltonika.lt/u/RokeJulianLockhart)\
**Post date:** [January 16, 2024, 9:30pm UTC](https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521/4 "2024-01-16T21:30:40Z")

</div>

> [@RokeJulianLockhart](#):
>
> I’m not familiar with whether having it rated for higher than the RUTXR1 (my sole use case for it) can handle (relevantly, see `https://www.reddit.com/r/UsbCHardware/comments/138rf9s/comment/jizbwbo/?utm_source=share&utm_medium=web2x&context=3`) would damage it.

https://embed.reddit.com/r/TeltonikaNetworks/comments/190bji8/comment/kgp8yww/?embed=true&ref_source=embed&ref=share&showmedia=false&showmore=false&depth=1&context=1

---

<div class="post-metadata">

**Author:** ![system](https://community.teltonika.lt/user_avatar/community.teltonika.lt/system/32/15707_2.png) [@system](https://community.teltonika.lt/u/system)\
**Post date:** [January 18, 2024, 10:55pm UTC](https://community.teltonika.lt/t/the-power-cable-which-teltonika-routers-use/3521/5 "2024-01-18T22:55:29Z")

</div>

Closed on January 18, 2024, 10:55pm UTC

This topic was automatically closed after 15 days. New replies are no longer allowed.
