# Scan Networks Rut956

**URL:** <https://community.teltonika.lt/t/scan-networks-rut956/3932>\
**Category:** Networking Solutions\
**Created:** [January 25, 2024, 3:20pm UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932 "2024-01-25T15:20:27Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![thhenschel](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/t/e495f1/32.png) [@thhenschel](https://community.teltonika.lt/u/thhenschel)\
**Post date:** [January 25, 2024, 3:20pm UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/1 "2024-01-25T15:20:27Z")

</div>

Hello, I have put an RUT956 into operation. SIM card inserted and I can access the Internet - perfect. I set up the router via WLAN. When I now try to access the Internet from a campsite, I am disconnected and cannot see an SSID. The latest firmware is installed. Do I have to connect the router via cable to scan networks?

---

<div class="post-metadata">

**Author:** ![Marijus](https://community.teltonika.lt/user_avatar/community.teltonika.lt/marijus/32/694_2.png) [@Marijus](https://community.teltonika.lt/u/Marijus)\
**Post date:** [January 26, 2024, 8:26am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/3 "2024-01-26T08:26:05Z")

</div>

Hi,

Can you please explain what you meant by setting up the router via WLAN? Could you provide more details about the issue you’re experiencing? This information will help resolve your problem.

Regarding your question, no, it’s not necessary to connect to the router using a cable to scan the network. You can also be connected through Wi-Fi.

Best regards,

Marijus

---

<div class="post-metadata">

**Author:** ![thhenschel](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/t/e495f1/32.png) [@thhenschel](https://community.teltonika.lt/u/thhenschel)\
**Post date:** [January 26, 2024, 10:09am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/4 "2024-01-26T10:09:06Z")

</div>

Hello Marijus,

what I mean is that I did the initial setup via WLAN with the SSID and password printed on the back. I then set it up using the integrated wizard., I can access the Internet via my SIM card. When I try to search for WLAN access, the connection to the router WLAN (RUT956\_5650) is interrupted. The same happens with the IOS app RutOS.

Greetings

Thomas

---

<div class="post-metadata">

**Author:** ![Marijus](https://community.teltonika.lt/user_avatar/community.teltonika.lt/marijus/32/694_2.png) [@Marijus](https://community.teltonika.lt/u/Marijus)\
**Post date:** [January 26, 2024, 1:32pm UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/5 "2024-01-26T13:32:10Z")

</div>

Hi,

Your explanation still seams a bit confusing. Can you provide screenshot of your configuration or what are you trying to do? Do you want to add additional WAN source via Wifi? Can you clarify what do you mean by WLAN? Please provide more information, as it will be very helpful in solving this issue.

Kind regards,

Marijus

---

<div class="post-metadata">

**Author:** ![thhenschel](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/t/e495f1/32.png) [@thhenschel](https://community.teltonika.lt/u/thhenschel)\
**Post date:** [January 26, 2024, 3:22pm UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/6 "2024-01-26T15:22:17Z")

</div>

> [@Marijus](#):
>
> Do you want to add additional WAN source via Wifi?

Hello Marijus,  
sorry that it is still incomprehensible. The way you have described it is correct. I would like to add an additional WAN source via WIFI. The exact procedure is not clear to me. Is there a detailed instruction?  
Greetings  
Thomas

---

<div class="post-metadata">

**Author:** ![Marijus](https://community.teltonika.lt/user_avatar/community.teltonika.lt/marijus/32/694_2.png) [@Marijus](https://community.teltonika.lt/u/Marijus)\
**Post date:** [January 29, 2024, 8:20am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/7 "2024-01-29T08:20:42Z")

</div>

Hi,

I have attached simple instructions to configuration example here: [RUT956 Wireless - Teltonika Networks Wiki](https://wiki.teltonika-networks.com/view/RUT956_Wireless#Client_Mode)

Kind regards,

Marijus

---

<div class="post-metadata">

**Author:** ![thhenschel](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/t/e495f1/32.png) [@thhenschel](https://community.teltonika.lt/u/thhenschel)\
**Post date:** [January 31, 2024, 9:48am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/8 "2024-01-31T09:48:30Z")

</div>

Hello Marijus,  
thank you for the description, unfortunately I still have no success. Once again my problem: I am logged in with my laptop on the router’s user interface via WIFI (SSID RUT956\_5650). A sim card is inserted in the RT956 and I have internet access via this sim card.  
Now I want to use a free Internet access at a campsite and log in there. To do this, I go to the router’s web interface and do the following:  
Network\>wireless, there I click scan2.4 Ghz  
Immediately afterwards I am disconnected from the router. What is the error?  
regards  
Thomas

---

<div class="post-metadata">

**Author:** ![Marijus](https://community.teltonika.lt/user_avatar/community.teltonika.lt/marijus/32/694_2.png) [@Marijus](https://community.teltonika.lt/u/Marijus)\
**Post date:** [January 31, 2024, 2:24pm UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/9 "2024-01-31T14:24:04Z")

</div>

Hello,

Thank you for bringing this to our attention. It seems like a potential bug, and I’ve forwarded the information to our Research and Development department for further investigation. I’ll keep you updated as soon as I have any concrete news.

Kind regards,

Marijus

---

<div class="post-metadata">

**Author:** ![induscem](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/i/ee7513/32.png) [@induscem](https://community.teltonika.lt/u/induscem)\
**Post date:** [February 1, 2024, 11:06am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/10 "2024-02-01T11:06:56Z")

</div>

The exact procedure is not clear to me. Is there a detailed instruction?  
Greetings

---

<div class="post-metadata">

**Author:** ![Marijus](https://community.teltonika.lt/user_avatar/community.teltonika.lt/marijus/32/694_2.png) [@Marijus](https://community.teltonika.lt/u/Marijus)\
**Post date:** [February 1, 2024, 11:08am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/11 "2024-02-01T11:08:45Z")

</div>

Hi @induscem,

This issue is being investigated. As I told above - I’ll update status of this situation as soon as i have any concrete news.

Marijus

---

<div class="post-metadata">

**Author:** ![induscem](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/i/ee7513/32.png) [@induscem](https://community.teltonika.lt/u/induscem)\
**Post date:** [February 5, 2024, 8:52am UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/12 "2024-02-05T08:52:17Z")

</div>

what I mean is that I did the initial setup via WLAN with the SSID and password printed on the back.[.](https://waplus.win/es/)[.](https://projectfreetv.onl/)

---

<div class="post-metadata">

**Author:** ![system](https://community.teltonika.lt/user_avatar/community.teltonika.lt/system/32/15707_2.png) [@system](https://community.teltonika.lt/u/system)\
**Post date:** [February 9, 2024, 3:20pm UTC](https://community.teltonika.lt/t/scan-networks-rut956/3932/13 "2024-02-09T15:20:44Z")

</div>

Closed on February 9, 2024, 3:20pm UTC

This topic was automatically closed after 15 days. New replies are no longer allowed.
