Running gpsd on RUTX11


I compiled the gpsd (GPSd — Put your GPS on the net!) for RUTX using the SDK.
Up to Firmware RUTX_R_00.07.02.7 that worked fine by just copying the init script /etc/init.d/gpsd and replace the native teltonika gpsd by the newly build gpsd.
The init script activate the gps module by issuing the AT commands to the modem (if I read the content of the init script correctly).
My Problem is that this initialization was removed from the gpsd init script to somewhere else in the newest firmware versions.
The question is now how to activate the GPS Module before starting my own gpsd.

Thanks in advanced for your answers.

Regards Joachim

This topic was automatically closed after 15 days. New replies are no longer allowed.