# Lv-can200 on fmb110 **URL:** \ **Category:** Telematics\ **Created:** [December 20, 2023, 6:09am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347 "2023-12-20T06:09:00Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![andrea.novelli](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/a/f0a364/32.png) [@andrea.novelli](https://community.teltonika.lt/u/andrea.novelli)\ **Post date:** [December 20, 2023, 6:09am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/1 "2023-12-20T06:09:00Z")
Hi everyone, I purchased a lv-can220 and I would like to combine it with an fmb110, I’m connecting the lv-can200 according to the instructions but when I connect it to the CAN line the LED doesn’t blink and the fmb doesn’t see the CAN parameters in the configuration program . What can I do? ---
**Author:** ![Maynard](https://community.teltonika.lt/user_avatar/community.teltonika.lt/maynard/32/6396_2.png) [@Maynard](https://community.teltonika.lt/u/Maynard)\ **Post date:** [December 20, 2023, 6:20am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/2 "2023-12-20T06:20:00Z")
Hi Andrea, Good day, please try to check the CAN connection ![image](https://community.teltonika.lt/uploads/default/original/2X/9/91562e66ff6f878a3311b0a62478801f751da99f.png) Also, check if the power supply connection is correct. ![image](https://community.teltonika.lt/uploads/default/original/2X/2/2bcc59b1f2c764aaa91b50e1f9b30c8396a4bcc9.png) After that, connect the CAN lines according to the vehicle schematic diagram Regards Maynard C. ---
**Author:** ![andrea.novelli](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/a/f0a364/32.png) [@andrea.novelli](https://community.teltonika.lt/u/andrea.novelli)\ **Post date:** [December 20, 2023, 6:42am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/4 "2023-12-20T06:42:53Z")
good morning, thanks for the info, but unfortunately the connections are correct, when I give power to the lv-can200 the light comes on, even when I reboot the fmb110 the light comes on, but it does nothing else! ---
**Author:** ![Maynard](https://community.teltonika.lt/user_avatar/community.teltonika.lt/maynard/32/6396_2.png) [@Maynard](https://community.teltonika.lt/u/Maynard)\ **Post date:** [December 20, 2023, 6:46am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/5 "2023-12-20T06:46:35Z")
Kindly check if the LVCAN200 is working with another device, the device should detect the LVCAN200, if the connection is correct and the device is working properly then there is a chance that the LVCAN200 that you are using is faulty. If it is faulty you can contact your sales manager for RMA process if it is still covered by the warranty Regards ---
**Author:** ![andrea.novelli](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/a/f0a364/32.png) [@andrea.novelli](https://community.teltonika.lt/u/andrea.novelli)\ **Post date:** [December 20, 2023, 7:22am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/6 "2023-12-20T07:22:53Z")
good morning, I purchased two fmb110 and two lv-can200 from mirifica, in reality I tried to attach the two lv-can200 on just one fmb110… is it possible that they are both faulty? I also checked and my car (fiat panda 139) is present in the supported vehicles ---
**Author:** ![Maynard](https://community.teltonika.lt/user_avatar/community.teltonika.lt/maynard/32/6396_2.png) [@Maynard](https://community.teltonika.lt/u/Maynard)\ **Post date:** [December 20, 2023, 7:30am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/7 "2023-12-20T07:30:01Z")
Hi Andrea, Do you have the schematic diagram of Fiat Panda 139? If you don’t have it, you can ask it from where you bought the LVCAN200 device. Or you can contact us directly. please contact with them on our official website [https://teltonika-gps.com/](https://teltonika-gps.com/) and click on the “Contact Us” button. When you click, please fill out the form and submit it. Note: as a topic, please choose “Vehicle Telematics”. Or you can send an e-mail with a description of your situation to us: [Teltonika - IoT, Internet of Things](https://teltonika-iot-group.com/about-us/contacts) Regards Maynard C. ---
**Author:** ![andrea.novelli](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/a/f0a364/32.png) [@andrea.novelli](https://community.teltonika.lt/u/andrea.novelli)\ **Post date:** [December 20, 2023, 7:50am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/8 "2023-12-20T07:50:13Z")
yes I have the diagram, the CAN line has blue and white as colours, I also have the code 11127! ---
**Author:** ![Maynard](https://community.teltonika.lt/user_avatar/community.teltonika.lt/maynard/32/6396_2.png) [@Maynard](https://community.teltonika.lt/u/Maynard)\ **Post date:** [December 20, 2023, 8:00am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/9 "2023-12-20T08:00:38Z")
Hello, If you have the same vehicle year model with your schematic diagram then it should work. You just need to check your wiring if it is properly connected, check the voltage of your power source, check the device to LVCAN200 connection, yellow and blue wire, and lastly check the CAN lines, use the multimeter to test each wire. Please check with your local supplier if they have local support for CAN installation. Regards ---
**Author:** ![Maynard](https://community.teltonika.lt/user_avatar/community.teltonika.lt/maynard/32/6396_2.png) [@Maynard](https://community.teltonika.lt/u/Maynard)\ **Post date:** [December 20, 2023, 8:09am UTC](https://community.teltonika.lt/t/lv-can200-on-fmb110/3347/10 "2023-12-20T08:09:27Z")