# L2TP RUTX50 Link

**URL:** <https://community.teltonika.lt/t/l2tp-rutx50-link/4212>\
**Category:** Networking Solutions\
**Created:** [February 12, 2024, 6:14am UTC](https://community.teltonika.lt/t/l2tp-rutx50-link/4212 "2024-02-12T06:14:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bechir](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/b/ecd19e/32.png) [@Bechir](https://community.teltonika.lt/u/Bechir)\
**Post date:** [February 12, 2024, 6:14am UTC](https://community.teltonika.lt/t/l2tp-rutx50-link/4212/1 "2024-02-12T06:14:14Z")

</div>

Good morning every body;

I want to connect 2 sites using L2TP VPN. To do it i use:

2 RUTX50 with Sim card (Public IP)  
2 Switch with VLAN  
2 laptop connected to the Switch.

I configure this Scenario:

Site 1: Pc\>\>\>\>\>Sw1\>\>\>\>\>RUTX50  
PC1: IP address: 192.168.20.10  
Sw1: Untagged port connected to PC1 ---- VLAN: 122  
Tagged port connected to RUTX50

Site 2: Pc\>\>\>\>\>Sw2\>\>\>\>\>RUTX50  
PC1: IP address: 192.168.20.10  
Sw2: Untagged port connected to PC2 ---- VLAN: 122  
Tagged port connected to RUTX50  
I configure the L2TP in both RUTX and i see that the VPN is UP. But i want to test the connectivity between the 2 PC. this link will be used to connect 1 site to the main core in Layer 2 .

Thank you for your help to do this scenario.

---

<div class="post-metadata">

**Author:** ![system](https://community.teltonika.lt/user_avatar/community.teltonika.lt/system/32/15707_2.png) [@system](https://community.teltonika.lt/u/system)\
**Post date:** [February 27, 2024, 6:14am UTC](https://community.teltonika.lt/t/l2tp-rutx50-link/4212/2 "2024-02-27T06:14:25Z")

</div>

Closed on February 27, 2024, 6:14am UTC

This topic was automatically closed after 15 days. New replies are no longer allowed.
