# Guest Network on LAN Port

**URL:** <https://community.teltonika.lt/t/guest-network-on-lan-port/3958>\
**Category:** Networking Solutions\
**Created:** [January 26, 2024, 2:06pm UTC](https://community.teltonika.lt/t/guest-network-on-lan-port/3958 "2024-01-26T14:06:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tkachta](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/t/7ea924/32.png) [@tkachta](https://community.teltonika.lt/u/tkachta)\
**Post date:** [January 26, 2024, 2:06pm UTC](https://community.teltonika.lt/t/guest-network-on-lan-port/3958/1 "2024-01-26T14:06:02Z")

</div>

Hello,

I would like to set up two separate networks on the RUTX10: A regular LAN on LAN ports 1 and 2, and a guest LAN with a second IP range for LAN port 3.

In the standard OpenWRT GUI, I have done this on other routers before as described in [[OpenWrt Wiki] DSA Mini-Tutorial](https://openwrt.org/docs/guide-user/network/dsa/dsa-mini-tutorial#multiple_bridged_networks)  
However, I cannot find the Bridge device section in the RUTX10 web interface.

Is such a configuration possible on the RUTX10?  
Alternatively, could this be done through the CLI in /etc/config/network?

Thanks! 🙂

---

<div class="post-metadata">

**Author:** ![AndzejJ](https://community.teltonika.lt/user_avatar/community.teltonika.lt/andzejj/32/30_2.png) [@AndzejJ](https://community.teltonika.lt/u/AndzejJ)\
**Post date:** [February 9, 2024, 1:48pm UTC](https://community.teltonika.lt/t/guest-network-on-lan-port/3958/3 "2024-02-09T13:48:35Z")

</div>

Hello @tkachta,

Apologies for the delayed response.

For this, I would suggest following our wiki example [here](https://wiki.teltonika-networks.com/view/VLAN_Set_Up) and creating a separate VLAN for your guest’s network. You can then attach that VLAN interface to a different firewall zone and follow the example [here](https://wiki.teltonika-networks.com/view/VLAN_Inter-Zone_accessibility_control_configuration_example) to manage traffic flow between the zones. You can also take a look [here](https://wiki.teltonika-networks.com/view/Firewall_traffic_rules) to see how firewall traffic rules can be used to have more granular control over the traffic.

For the WiFi Guest network, I would recommend following the configuration example [here](https://wiki.teltonika-networks.com/view/How_to_set_up_a_guest_WiFi_network).

Kind Regards,

---

<div class="post-metadata">

**Author:** ![AndzejJ](https://community.teltonika.lt/user_avatar/community.teltonika.lt/andzejj/32/30_2.png) [@AndzejJ](https://community.teltonika.lt/u/AndzejJ)\
**Post date:** [February 13, 2024, 2:06pm UTC](https://community.teltonika.lt/t/guest-network-on-lan-port/3958/4 "2024-02-13T14:06:49Z")

</div>

This topic was automatically closed after 18 days. New replies are no longer allowed.