# Analog Input Value in RMS

**URL:** <https://community.teltonika.lt/t/analog-input-value-in-rms/21647>\
**Category:** Issue\
**Created:** [October 21, 2026, 4:14pm UTC](https://community.teltonika.lt/t/analog-input-value-in-rms/21647 "2026-10-21T16:14:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![stevet](https://community.teltonika.lt/letter_avatar_proxy/v4/letter/s/858c86/32.png) [@stevet](https://community.teltonika.lt/u/stevet)\
**Post date:** [October 21, 2026, 4:14pm UTC](https://community.teltonika.lt/t/analog-input-value-in-rms/21647/1 "2026-10-21T16:14:33Z")

</div>

Hello,

I have a RUT956 that I am using to monitor temperature. I have an RTD analog out connected to the analog input of the 956. Modem works great, reading correct values of close to 28 degrees C. I have monitoring templates on my RMS platform where I am logging the temperature twice daily. The problem is the reading in RMS is 24 degrees C. Can anyone help me figure out the issue here? This is a small pilot project I am looking after, and I have three devices operating in a very similar manor, two identical. One giving me grief, the other appears to be reporting correctly. Both using same monitoring template.

 ![TEL_ANA](https://community.teltonika.lt/uploads/default/original/3X/e/0/e0038c583e7b4bc7fad32bcb93de8df958bc54b5.jpeg)

 ![RMS_ANA](https://community.teltonika.lt/uploads/default/original/3X/8/d/8d55a511695474655e1e81a807adf3926fc70121.jpeg)